RaceWax Core Shot Ski Base Repair Kit 5/5 clear/black Ptex Metal Grip - (RA-5000)

P-Tex Rods for base repairs.

• 5 clear ptex rods; 5 black ptex rods
• 8 mm diameter. About 190 mm long (7.5 inches) long.

Metal base scraper.

• Use this for P-Tex work on ski and snowboard bases.
• Suitable for light base planing.
• Vinyl storage sleeve for metal scraper included.

3M Brand Base Buffing/Treatment Fibertex/Scotchbrite Pads (4.5 in x 6 in) for buffing base after repair.

• 1 Medium (Maroon)
• 1 Fine (Gray)
• 1 Non-abrasive (White) large non-woven nylon impregnated with ultra-fine abrasive

Metal Grip Ski Snowboard Base Bonding Material: Allows base material to adhere to the ski edges and core, offering a much better bond than co-polymer. Metal grip is designed to fill up half the repair area that is against the ski core or edge. Once metal grip has been applied, standard p-tex base repair material is laid over it for a finished repair. Metal grip will work for repairs where a base patch has been the traditional method, decreasing the work time significantly. A chisel tip soldering iron (found at tool and hardware stores) is recommended to melt metal grip into the base.

• One, 1 foot rope of Black Metal Grip
• One, 1 foot rope of Clear Metal Grip